After the leak, before tile

Kitchens and bathsrebuilt on the flood file

A burst supply under the sink, a shower pan that failed, a rec room wet bar. Shield dries the assembly, then cabinets, pans, and fixtures — with a membrane, not a coat of paint.

Professional Kitchen and Bath Restoration

Why wet rooms wait for a membrane

GTA rec-room baths and condo ensuites fail again if you skip the pan

Specify while it is open

Layout and finishes are written while cavities are still open after the GTA leak — not after tile is already back

Wet-room membrane first

A Toronto shower or rec-room bath gets a pan and barrier, not paint on damp board

After meters pass

Cabinets and fixtures wait until the structure is dry. Occupied houses stay liveable around the work

Same office as the flood

The crew that mapped the moisture hangs the cabinets and resets fixtures

What we put back after a GTA leak

Cabinets, pans, fixtures — specified while the walls are open

Kitchen Restoration

  • Cabinet refinishing & repair
  • Countertop restoration
  • Tile & backsplash renewal
  • Appliance integration

Bathroom Revival

  • Tile & grout restoration
  • Fixture updates
  • Vanity refinishing
  • Waterproofing services

Surface Treatments

  • Natural stone restoration
  • Ceramic tile repair
  • Countertop refinishing
  • Custom finishes

Structural Updates

  • Plumbing upgrades
  • Electrical improvements
  • Ventilation systems
  • Storage solutions

A wet room that will not leak twice

After a GTA supply-line or shower-pan failure, Shield dries the assembly, writes a membrane, then cabinets and fixtures — match what was there, or upgrade while the walls are open.

  • Membrane and pan before tile
  • Cabinet and counter decisions on this file
  • Fixture reset after isolation
  • Same office that mapped the leak
Kitchen and Bath Restoration Results

Request a wet-room rebuild

Address, which room, and whether water is still moving

Membrane first • then cabinets and fixtures • same flood file

Put the wet room back — properly

Call the Bay Street desk if the kitchen or bath is still taking water.

Customer stories

GTA clients, in their words

FAQ

Frequently asked questions

Answers from the Bay Street desk — Toronto, Vaughan, and North York.

How fast can Shield respond to a water damage emergency in Toronto?

Shield targets an hour for water emergencies across Toronto, Vaughan, and North York. The Bay Street desk assigns the nearest office — Brisbane, 234 Bay, Terra, or Carnforth — 24/7, with extraction and drying gear already on the truck.

Is Shield available 24 hours a day for water damage?

Yes. The Bay Street desk is staffed around the clock. A person picks up — not a voicemail tree — and routes night, weekend, and holiday losses throughout the GTA.

What should I do while waiting for the water damage team to arrive?

If it is safe, shut off the main water supply for a burst pipe. Move valuables and electronics to higher ground, avoid standing water because of electrical hazards, do not use fans on sewage-contaminated water, and take photos of the damage for your insurance claim. Your safety comes first.

What do I do if a pipe bursts in my Toronto condo or apartment?

Shut off the water at the suite or building valve if you can, then call Shield. In a stacked condo, tell the super so they can isolate the riser. Move belongings off the wet floor, keep electrical outlets clear, and wait for extraction. We dry the assembly and coordinate with the board.

Does Shield work with insurance companies?

Yes. Shield works with Ontario home and commercial carriers. We document Category rating, moisture maps, photos, and drying logs, and we can speak with your adjuster or attend the site inspection.

Will Shield help with my water damage insurance claim?

Yes. We provide documentation your carrier needs, including scope of damage, moisture maps, drying logs, and a written estimate. We can communicate directly with your adjuster and attend the on-site inspection when scheduled.

Bay Street desk

+1 (365) 217-9343